Faux Finishes

Valspar Signature Colors Faux Clear Protector Faux Finish

Clear Protector

Available Finishes:
(Click to download product details)


Quick Facts

  • Valspar Faux Clear Protector provides the utmost protection to faux finished surfaces and objects.
  • Available in flat, satin, and semi-gloss
  • For properly prepared and previously painted or faux finished metal, wood, wallpaper and plastic laminate surfaces
  • Do not use on counters, vinyl wallpaper, kitchen/dining tables or floor surfaces.
  • Available in quarts and gallons
  • Available at Lowe's

Related Products

Valspar Signature Colors Clear Mixing Glaze Faux Finish

Clear Mixing Glaze

Valspar Interior Signature Colors Paint

Signature Colors Paint

Features

Valspar Faux Clear Protector provides the utmost protection to faux finished surfaces and objects.

Coverage

One gallon covers approximately 400 sq. ft. (37.2 m²) depending upon surface porosity. Thin sparingly with water (8 fl. oz. per gallon) for spray application only. Formulated to be applied with brush and roller without dilution.

Where to Use

Use on properly prepared and previously painted or faux finished metal, wood, wallpaper and plastic laminate surfaces such as cabinets, furniture, walls, decorative projects and childrens toys. Do not use on counters, vinyl wallpaper, kitchen/dining tables or floor surfaces.

Painting Instructions and Tips

Click on the product information sheet at the top of the page for tips and video to assist you in getting the most from your faux finish. Clear Protector is used to protect your faux finish, especially in high traffic areas. See Interior Decorative Painting how-to guides for more information about effects to protect. Not to be used over Venetian Plaster effects.

Preparing the Surface

Valspar™ Signature Colors® Faux Clear Protector allows the existing surface to show through. The surface must be prepared and be in satisfactory condition before applying this product. Clean and dry surface thoroughly. Surfaces with unsightly blemishes will show through this finish.

Application

Stir product thoroughly. Use a premium quality polyester bristle brush to paint metal and wood trim; short nap woven roller or airless sprayer for walls and large areas. Apply evenly and smooth out in one direction. Do not over brush or overwork this product as bubbles may develop. When rolling, apply in a crisscross pattern with smooth, even strokes. Work from dry to wet areas, covering 3 foot square areas at a time. Finish with long, even strokes. Allow to cure 7 days before washing. Use a mild detergent and sponge when cleaning surface.

Dry Time

Apply when surface and air temperatures are 50-90°F (10-32°C). Dries to the touch in one hour. Allow to dry 4 hours before recoating.

Lead Warning

WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.

Faux Finishes

Valspar's extraordinary selection faux finishes will keep your interiors looking freshly painted for years to come.