Features

Create beautiful faux finish and decorative finishes with this slow drying, translucent iridescent glaze. Create shimmering effects with this easy to use glaze. Use alone over a base coat or apply over Color Glazes for a multi-dimensional look. Use with the following techniques: Color Washing, Stippling, Dragging, Sponging and Rag Rolling.

Coverage

Additive Techniques: 250-400 sq. ft. (23.2-37.2 m²) Subtractive Techniques: 175-200 sq. ft. (16.3-18.6 m²)

Where to Use

Use on clean walls, ceilings, furniture, cabinets and trim. Use above or below a chair rail for dramatic designer effects. Tip: Practice your technique beforehand on a sample board.

Preparing the Surface

Make sure surfaces are clean, dry and free of peeling paint. Use a primer on new wallboard. Use a base coat of Valspar paint under Iridescent Glaze. Allow base coat to dry 4 hours or overnight before applying glazes.

Application

1. Apply the base coat according to label instructions. 2. Apply Iridescent Glaze as outlined in the Valspar® Signature Colors® Faux How-to Guide. 3. Protect your decorative finish with Valspar® Signature Colors® Faux Clear Protector. Allow glaze to cure one week before applying clear coating.

Working Time

This glaze will stay workable for up to 45 minutes. This allows you to work and re-work an area if needed. Avoid drafts from fans, open windows, etc. to prevent premature drying. Surface and air temperatures should be between 55-75°F.