Valspar® Duramax® Elastomeric Masonry, Stucco & Brick Paint

Valspar® Duramax® Elastomeric Masonry, Stucco & Brick Paint forms a weatherproof barrier against nature's harsh extremes using advanced FlexShield365™ Technology for year-round resistance to cracking and peeling. Stucco and masonry structures expand and contract in response to the weather and structural stresses. Unlike typical exterior paints, this coating fills and bridges hairline cracks, helping to prevent damaging water penetration. It passes Federal Specification TT-C-555B, sec. 3.3.3, withstanding 98 mph wind-driven rain. This premium-quality coating protects your home like a flexible blanket, keeping your masonry, stucco and brick safe and beautiful for years to come. It is available in white and can be tinted to many custom colors to make your home a showplace!

  • Maximum weather protection
  • FlexShield365TM Technology – Year-round resistance to cracking and peeling
  • Exceptional coverage & durability
  • Withstands 98 mph wind-driven rain
  • Fade resistant
  • Gives mold, mildew and algae-resistant coating
  • Bridges hairline cracks
  • Flexible; won’t crack or peel
  • Excellent spray application
  • 100% acrylic latex

Sheens

Flat


Sizes

1 Gallon, 5 Gallon


Coverage

90 ft²/gal - 130 ft²/gal


AVAILABLE AT LOWE'S

HOW TO USE

  • Usage
    Properly prepared exterior-masonry surfaces including cement, cinder block, stucco, concrete and brick. Do not use on glazed brick, floors or steps.
  • Prep
    Apply paint to clean, sound surfaces. Large cracks, crumbling areas or water damage may need professional repair. New concrete or stucco must cure a month before applying a finish.
  • Application
    Paint only when air or surface temperatures are between 35–90 °F (2–32 °C). Use a paint paddle to stir paint up from the bottom of the can. Intermix containers of the same color. Apply this product heavily to achieve the best weatherproofing characteristics. Cover grass and shrubbery with plastic or cloth. Apply two coats of this product to ensure that the correct film thickness (10 mil dry film) is achieved. The recommended spreading rate on a smooth surface is 130 sq.ft. per gallon per coat (a 10' x 13' area). On rough stucco or other uneven surfaces, this may be as low as 90 sq.ft. per gallon per coat. NOTE: For the two coats, you will need one gallon for every 45–65 sq.ft. (4.2–6 m2 ).
  • Dry Time
    Dry Time @ 77 °F and 50 % Relative Humidity
    To The Touch: 1 hour - 2 hour
    Recoat: 24 hour
  • Clean-up & Disposal
    Clean up with warm, soapy water.
  • Application Temperature

    35 °F - 90 °F

  • Recommended Coats

    2 coats

  • Dry to the Touch*

    1 hour - 2 hour

  • Recoat*

    24 hour

*Dry Time @ 77 °F and 50 % Relative Humidity

Data Sheets

Download the product data sheet (PDS) and safety data sheet (SDS) for your Valspar duramax elastomeric masonry stucco brick paint.

Product Number Base Container Size SDS PDS
042397590849 Tintable White 5 Gallon - -
042397590832 Tintable White 1 Gallon SDS -
042397608575 Medium Base 1 Gallon SDS -

Ratings & Reviews