Actual color may vary from on-screen representation.
Valspar® Masonry & Stucco Primer/Conditioner
Valspar® Masonry & Stucco Primer/Conditioner penetrates and seals the surface and bonds chalk to it. The white pigmented finish allows you to know which masonry and stucco surfaces have been coated and how well.
HOW TO USE
UsageFor use on masonry, stucco, concrete, concrete block, plaster and previously painted surfaces.
PrepSurface should be clean, dry and dull. Clean areas to remove all loose particles. Peeling paint, efflorescence, concrete dust and heavy chalk should be removed with a power washer and an appropriate cleaner. Rinse the surface thoroughly and allow it to dry. Scrape and sand smooth any remaining peeling surfaces. Make sure the surface is dull. Allow new surfaces to cure for at least 7 days. Surface may have a pH from 6 to 13.
ApplicationStir thoroughly. Intermix containers to ensure uniform color. Apply with a premium-quality roller, premium quality synthetic brush or airless sprayer. If applying by spray, back-roll or backbrush to work paint into the surface. Apply a liberal coat of primer uniformly, working well into the surface. Surface conditions and application technique can also impact coverage.
Dry TimeDry Time @ 77 °F and 50 % Relative HumidityTo The Touch: 30 minute - 3 hour Recoat: 3 hour
Clean-up & DisposalClean up with warm, soapy water.
Dry to the Touch*
30 minute - 3 hour