Actual color may vary from on-screen representation.
Valspar® Oil Porch, Floor & Patio Paint
This oil-based paint glides on and dries to a hard, glossy finish for smooth, long-lasting protection
Paint Sheen Comparison
Available sheens for this product
400 ft²/gal - 500 ft²/gal
HOW TO USE
UsageIdeal for use on properly prepared exterior wood, concrete, and primed metal such as porches, patios, breezeways, and concrete floors. Not for use on exterior wood decks, garage floors or other automobile parking areas.
PrepThe surface must be clean, dry and free of all loose or peeling paint. Thoroughly clean surface and remove wax and grease with an all-purpose cleaner (TSP or substitute). Clean joints and cracks to remove all foreign material. Patch voids with appropriate crack patching material. Areas where ponding water is evident should be leveled prior to application. Although not required, a coat of Valspar® Concrete Bonding Primer prior to application of Anti-Skid Porch and Floor Paint coats will increase the adhesion to these properly prepared surfaces.
ApplicationMix well before and during use. Intermix all cans of the same color. To increase traction, add an anti-skid additive when applying the finishing coat. Use a premium-quality roller, polyester brush, pad applicator or airless sprayer. DO NOT USE ANTISKID ADDITIVE IF APPLYING BY SPRAY. Apply liberally over the full length of the surface to avoid lap marks. If applied by airless sprayer, back-roll to ensure proper penetration. Finish with long, even strokes in one direction.
Dry TimeDry Time @ 77 °F and 50 % Relative HumidityTo The Touch: 24 hour - 72 hour Recoat: 24 hour
Clean-up & DisposalClean tools with mineral spirits.