Valspar® All-Weather Exterior Primer Sealer

Valspar® Latex Exterior primer is the ideal prime coat under all oil and latex house paints. It is formulated with 100% acrylic resin for excellent adhesion, long-lasting protection and resistance to peeling and blistering. Blocks tannin stains on redwood and cedar and gives a mildew resistant coating.

  • Excellent Adhesion
  • Seals a variety of surfaces for better paint coverage
  • Extends life of topcoat
  • Gives mildew resistant coating
  • Can be used on bare wood decks and porches to improve topcoat adhesion
  • 100% acrylic resin reduces peeling with temperature fluctuations
Sizes 1 Quart, 1 Gallon, 5 Gallon
Coverage 300 ft²/gal - 400 ft²/gal
Paint Calculator
Available at Lowe's

How to use

Usage Use on properly prepared exterior surfaces, including bare wood, previously painted wood siding and trim, brick, concrete, cement, stucco, non-rusted galvanized gutters and downspouts. Bare redwood and cedar may require an additional coat to control severe staining areas. DO NOT USE over hardboard siding or gummy pine; use an exterior oil primer for these surfaces.
Application Stir thoroughly before and occasionally during use. Apply when air and surface temperatures are between 50 ° - 90 °F (10 ° - 32 °C). Thin only for spray application with up to 8 oz. of water per gallon. Apply a liberal coat of primer uniformly, working well into the surface.
Dry Time Dry Time @ 77 °F and 50 % Relative Humidity To The Touch: 30 minute – 2 hour Recoat: 2 hour
Clean-up & Disposal Clean up with warm, soapy water.
Dry to the Touch* 30 minute – 2 hour
*Dry Time @ 77 °F and 50 % Relative Humidity

Specifications

Download the product data sheet (PDS) and safety data sheet (SDS) for your product Valspar® All-Weather Exterior Primer Sealer.
Product Number Base Container Size SDS PDS
042397585272 Tint White 5 Gallon SDS SDS SDS
042397585265 Tint White 1 Gallon SDS SDS SDS
042397585258 Tint White 1 Quart SDS SDS SDS