HOW TO USE

• Usage
  Properly prepared, interior and exterior surfaces, including previously painted and primed plaster,wood, brick, drywall, cement, metal.
• Prep
  Thoroughly clean the surface and allow to dry. Remove wallpaper and loose, peeling paint. Remove gloss from shiny surfaces. Patch cracks and spot prime. Valspar® Interior/Exterior High Gloss Enamel can be used to prime interior bare surfaces before applying the finish coat. For bare exterior surfaces, use an appropriate Valspar® exterior primer before using this product.
• Application
  Stir paint thoroughly. Intermix containers to ensure uniform color. Apply with a premium-quality roller, polyester brush or airless sprayer. Paint the ceiling first, then the walls. If applying by roller, roll from dry area into wet area using firm, crisscross strokes. Finish with long, even strokes in one direction. Note: Some deep or bright colors may require an additional coat to obtain complete hide. Surface conditions and application technique can also impact coverage.
• Dry Time
  Dry Time @ 77 °F and 50 % Relative Humidity
  To The Touch: 1 hour - 8 hour
  Recoat: Overnight
• Clean-up & Disposal
  Clean up with warm, soapy water.