Valspar Cover Coat Interior Latex Paint

Valspar Cover Coat Interior Latex Paint is a fast-drying interior latex wall & trim paint that flows on smoothly and evenly. This durable finish offers washability on wall and trim surfaces. Formulated for professional painter use in residential, commercial, institutional and industrial applications.

  • Washable
  • Low odor
  • Clean up with soap and water
  • Fast Drying
  • Walls and trim

Sheens

Flat, Semi-Gloss


Sizes

1 Gallon, 5 Gallon


Coverage

300 ft²/gal - 400 ft²/gal


AVAILABLE AT INDEPENDENT RETAILERS

HOW TO USE

  • Usage
    Interior wall and ceiling surfaces, including previously painted or primed drywall, plaster, brick, cement, wood, metal.
  • Prep
    General: Read the Lead Warning paragraph. Thoroughly clean the surface and allow to dry. Remove all wax, grease, dirt, chalk, mildew, loose and peeling paint and other foreign matter. Remove gloss from shiny surfaces. Repair all cracks and nail holes with patching compound. Painting over wallpaper is not recommended. New or bare surfaces should be primed with an appropriate Valspar® primer. Drywall and Plaster: Fill cracks, pits and voids with patching compound. Allow new plaster to fully cure and sand smooth. Remove all sanding dust. Prime new and bare surfaces with Valspar® Latex Primer-Sealer or Valspar® Bonding Primer. Block: Masonry surfaces and mortar should be fully cured, usually 30 days. Remove all loose material or dust. Fill pores of bare concrete block with block filler, then top coat. Cement: New concrete, masonry surfaces and mortar should be cured, usually 30 days. Remove all form release or curing agents. Remove all loose material or dust. Prime bare surfaces with Valspar® Bonding Primer or Valspar Latex Multi-Purpose Primer. Bare Wood: Sand wood smooth and patch holes and imperfections with wood filler or putty and sand smooth. Remove all sanding dust. Prime new and bare surfaces with Valspar® Bonding Primer. Metal: Hand or power tool clean steel to remove loose mill scale and rust. Remove oily residues and contaminants with solvent or appropriate cleaning solution. Change rags often, to assure that residual contaminants are completely removed. Prime with Valspar® Armor Anti-Rust Primer.
  • Application
    Stir paint thoroughly. Intermix containers to ensure uniform color. Apply only when paint, surface and air temperatures are 50–90 °F (10–32 °C) during application and drying time. Apply with a premium-quality roller, polyester brush or airless sprayer. Paint the ceiling first, then the walls. If applying by roller, roll from dry area into wet area using firm, crisscross strokes. Finish with long, even strokes in one direction. Note: Some deep or bright colors may require an additional coat to obtain complete hide. Surface conditions and application technique can also impact coverage.
  • Dry Time
    Dry Time @ 77 °F and 50 % Relative Humidity
    To The Touch: 30 minute - 60 minute
    Recoat: 2 hour - 4 hour
  • Clean-up & Disposal
    Clean up with warm, soapy water.
  • Application Temperature

    50 °F - 90 °F

  • Recommended Coats

    2 coats

  • Dry to the Touch*

    30 minute - 60 minute

  • Recoat*

    2 hour - 4 hour

*Dry Time @ 77 °F and 50 % Relative Humidity

Data Sheets

Download the product data sheet (PDS) and safety data sheet (SDS) for your Valspar cover coat interior latex paint.

Product Number Sheen Base Container Size SDS PDS
080047448874 Flat White 1 Gallon SDS PDS
080047448881 Flat White 5 Gallon - -
080047449055 Flat Antique White 1 Gallon SDS PDS
080047449062 Flat Antique White 5 Gallon - -
080047449079 Flat Dover White 1 Gallon SDS PDS
080047449086 Flat Dover White 5 Gallon - -
080047448898 Semi-Gloss White 1 Gallon SDS PDS
080047448904 Semi-Gloss White 5 Gallon - -
080047449093 Semi-Gloss Antique White 1 Gallon SDS PDS
080047449109 Semi-Gloss Antique White 5 Gallon - -
080047449116 Semi-Gloss Dover White 1 Gallon SDS PDS
080047449123 Semi-Gloss Dover White 5 Gallon - -

Ratings & Reviews