ValsparPRO® Contractor Coat Ceiling Paint

Valspar® Contractor Coat Latex Ceiling Paint is commercial grade ceiling paint with great hide and coverage. Formulated specifically for application to ceilings, Contractor Coat Ceiling Paint’s high-hiding pigments dry quickly to a matte finish that reduces reflection and glare in all lighting conditions. Contractor Coat Ceiling Paint applies easily with minimal spattering, providing a smooth, uniform finish.

  • Great hide and coverage
  • Spatter resistant
  • Easy spray, brush and roll application
Sheens Flat Paint Sheen Guide
Sizes 1 Gallon, 5 Gallon
Coverage 300 ft²/gal - 400 ft²/gal
Paint Calculator
Available at Lowe's

How to use

Usage Properly prepared durable textured or plain interior ceilings including previously painted and primed plaster, drywall and acoustical tile. See Surface Preparation for ""blown on"" soft-fibered ceiling surfaces.
Prep Thoroughly clean the surface and allow to dry. Remove all wax, grease, dirt, chalk, mildew, loose and peeling paint and other foreign matter. Remove gloss from shiny surfaces. Repair all cracks and nail holes with patching compound. Painting over wallpaper is not recommended. New or bare surfaces should be primed with an appropriate Valspar® primer.
Dry Time Dry Time @ 77 °F and 50 % Relative Humidity To The Touch: 2 hour – 4 hour Recoat: 4 hour
Clean-up & Disposal Clean up with warm soapy water
Application Temperature 50 °F - 90 °F
Dry to the Touch* 2 hour – 4 hour
*Dry Time @ 77 °F and 50 % Relative Humidity

Specifications

Download the product data sheet (PDS) and safety data sheet (SDS) for your product ValsparPRO® Contractor Coat Ceiling Paint.
Product Number Sheen Base Container Size SDS PDS
042397613982 Flat White 1 Gallon SDS SDS SDS
042397614002 Flat White 5 Gallon SDS SDS SDS