Valspar® Porch & Floor Oil Enamel

This oil-based paint glides on and dries to a hard, glossy finish for smooth, long-lasting protection

  • Glides on ultra smooth and dries to a hard, glossy finish
  • Polyurethane-fortified enamel resists weather, wear and scratches
  • Easy to use: brush, roller or spray application
  • Beautiful high-gloss finish stands up to the toughest indoor and outdoor conditions
  • Available in most Valspar colors


400 ft²/gal - 500 ft²/gal



  • Usage
    Ideal for use on properly prepared exterior wood, concrete, and primed metal such as porches, patios, breezeways, and concrete floors. Not for use on exterior wood decks, garage floors or other automobile parking areas.
  • Prep
    The surface must be clean, dry and free of all loose or peeling paint. Thoroughly clean surface and remove wax and grease with an all-purpose cleaner (TSP or substitute). Clean joints and cracks to remove all foreign material. Patch voids with appropriate crack patching material. Areas where ponding water is evident should be leveled prior to application. Although not required, a coat of Concrete Primer prior to application of Anti-Skid Porch and Floor Paint coats will increase the adhesion to these properly prepared surfaces.
  • Application
    Mix well before and during use. Intermix all cans of the same color. To increase traction, add an anti-skid additive when applying the finishing coat. Use a premium-quality roller, polyester brush, pad applicator or airless sprayer. DO NOT USE ANTISKID ADDITIVE IF APPLYING BY SPRAY. Apply liberally over the full length of the surface to avoid lap marks. If applied by airless sprayer, back-roll to ensure proper penetration. Finish with long, even strokes in one direction.
  • Dry Time
    Dry Time @ 77 °F and 50 % Relative Humidity
    To The Touch: 24 hour - 72 hour
    Recoat: 24 hour
  • Clean-up & Disposal
    Clean tools with mineral spirits. Do not allow water to pond or puddle on newly painted surfaces.
Application Temperature
50 - 90 °F
Recommended Coats
1, 2 coats
Dry To the Touch*
24 hour - 72 hour
24 hour
*Dry Time @ 77 °F and 50 % Relative Humidity

Data Sheets

Download the product data sheet (PDS) and safety data sheet (SDS) for your Valspar porch floor oil enamel.

Ratings & Reviews