Actual color may vary from on-screen representation.
Valspar® Supreme Exterior Paint & Primer
With only one coat, Valspar® Supreme Exterior Paint & Primer protects your home with a tough enamel coating that resists mildew and harsh weather. Warranted for 20 years, this fast drying flat fights fading, chalking and yellowing on exterior surfaces.
Paint Sheen Comparison
Available sheens for this product
Flat, Satin, Semi-Gloss
1 Quart, 1 Gallon, 5 Gallon
HOW TO USE
UsageIdeal for wood siding and trim, hardboard siding, fiber-cement board, primed metal, shakes and asbestos shingles, stucco, stone, brick, cinder block, concrete plus steel, aluminum and vinyl siding.
PrepThoroughly clean the surface and allow to dry. Remove all dirt, dust, chalk, rust, grease, wax and mildew. Previously painted surfaces (including painted metal siding): Scrape off loose and peeling paint, sand smooth, then spot prime. Thoroughly remove chalk by vigorous washing, then rinse. Remove gloss from shiny surfaces. Countersink nails and apply an oil-based metal primer to exposed nail heads. Caulk cracks and joints. Bare wood: Remove sap from knots and sappy areas. Spot prime with a stain-blocking primer/sealer. Prime entire area with a latex or oil-based exterior primer.
ApplicationStir paint thoroughly before and during use. Use a premium quality roller or polyester brush. Paint gutters, window sashes and frames first. Then, start at the top of the house and work across, always ending up at a door, window or outer edge. May also be applied by airless sprayer, following the sprayer instructions. Note: To ensure uniform color, intermix all containers of the same color.
Dry TimeDry Time @ 77 °F and 50 % Relative HumidityTo The Touch: 1 hour - 4 hour Recoat: 4 hour
Clean-up & DisposalSoap & water cleanup