Valspar® One-Coat Solid Stain & Sealer

Valspar Solid Stain & Sealer offers maximum sunblocking protection while adding a richly colored coating for ultimate coverage and durability.

  • All-weather defense in one coat
  • Rain-ready in four hours
  • UV defense against fading
  • Available in over 2000 beautiful colors
  • Provides a mold- and mildew- resistant finish
  • 10-year protection on decks, 25 years on fences & siding
Opacity Solid
Stain Guide (PDF)
Sizes 1 Quart, 1 Gallon, 5 Gallon
Coverage 150 ft²/gal - 350 ft²/gal
Available at Lowe's

How to use

Usage New or reconditioned wood decks, porches, outdoor furniture, steps, railings, fences and siding.
Prep In order to be effective, a stain must be able to adhere. Surfaces must be sound and may be dry or damp. If damp, the wood should be free of puddles and not feel wet. Be sure surface is free of all dirt, mildew stains, loose wood fibers and other foreign matter. Old loose stain should be scraped off and the edges sanded smooth for proper adhesion. Prepare previously stained or weathered surfaces with Valspar® Wood Cleaner to remove dirt and mildew stains or Valspar® AllIn-One Wood Prep to revive extremely weathered surfaces. Scrubbing with a stiff bristle brush is required to completely remove all dirt and debris.
Application Apply with nylon or polyester brushes, stain pads or professional spray equipment. When spraying, always back-brush immediately. To ensure desired appearance and proper drying time, always finish a small test area before proceeding. Do not overapply. Shake and stir thoroughly before and during use. If project requires more than 1 container, blend all containers together to ensure uniformity. Apply to small sections at a time (1–3 boards); start at one edge of the board and work end-to-end, following through to the end of the boards to avoid lap marks.
Dry Time Dry Time @ 77 °F and 50 % Relative Humidity To The Touch: 4 hour – 24 hour Recoat: 2 hour - 4 hour
Clean-up & Disposal Clean brushes and equipment with soap and water. Dispose of empty container or unused portion in accordance with local, state and federal regulations.
Application Temperature 50 °F - 90 °F
Dry to the Touch* 4 hour – 24 hour
*Dry Time @ 77 °F and 50 % Relative Humidity

Specifications

Download the product data sheet (PDS) and safety data sheet (SDS) for your product Valspar® One-Coat Solid Stain & Sealer.
Product NumberBaseContainer SizeSDSPDS
035777885000Neutral Base1 Quart SDS SDS SDS PDS
035777885284Neutral Base5 Gallon SDS SDS SDS PDS
035777885307White Base5 Gallon SDS SDS SDS PDS
035777885154Neutral Base1 Gallon SDS SDS SDS PDS
035777885147White Base1 Gallon SDS SDS SDS PDS
035777884959White Base1 Quart SDS SDS SDS PDS