Valspar® Door & Trim Classic Enamel

This door and trim enamel is a traditional long oil alkyd formula developed specifically for door and trim application.

  • Superior flow and leveling – dries to a smooth, glass like finish
  • Excellent durability
  • Excellent block resistance minimizing sticking of painted doors and windows
  • Specially formulated to resist yellowing as coating ages
  • Easy spray, brush and roll application


300 ft²/gal - 400 ft²/gal



  • Usage
    Interior primed or previously painted wood trim, cabinets and doors.
  • Prep
    Remove rust, oil, grease, mildew salt and dirt from surface. Remove all dust or other loose material off the surface. Verify area is dry and free of all dust and loose material.
  • Application
    Stir paint thoroughly. Intermix containers to ensure uniform color. Apply with a premium-quality roller or polyester brush. Note: Two thin coats are required. Bare wood and some deep or bright colors may require an additional coat to obtain complete hide. Surface conditions and application technique can also impact coverage. Allow to dry thoroughly before recoating or use.
  • Dry Time
    Dry Time @ 77 °F and 50 % Relative Humidity
    To The Touch: 6 hour - 8 hour
    Recoat: 24 hour - 24 hour
  • Clean-up & Disposal
    Clean spills and equipment with mineral spirits.
Application Temperature
50 - 90 °F
Recommended Coats
2 coats
Dry To the Touch*
6 hour - 8 hour
24 hour - 24 hour
*Dry Time @ 77 °F and 50 % Relative Humidity

Data Sheets

Download the product data sheet (PDS) and safety data sheet (SDS) for your Valspar door trim classic enamel.

Ratings & Reviews