Valspar® Door & Trim Enamel Latex Plus

An advanced technology water-based alkyd cross linking formula. It offers benefits of a traditional alkyd and latex formulas.

  • Superior flow and leveling leaving a smooth finish
  • Hard, durable film
  • Easy soap and water cleanup
  • Quick dry time which allows same day recoat and a quick tape time
  • Good BLOCK resistance, which minimizes doors and windows sticking to other painted surfaces
  • Excellent sag resistance
  • Extended open time


300 ft²/gal - 400 ft²/gal



  • Usage
    Interior primed or previously painted wood trim, cabinets and doors Ideal for giving custom wood work a rich, elegant look Can be used on interior metal doors Millwork in residential new construction Can be used on a variety of other surfaces
  • Prep
    Remove rust, oil, grease, mildew salt and dirt from surface. Remove all dust or other loose material off the surface. Verify area is dry and free of all dust and loose material. Previously Painted Surfaces: Follow General prep section. Glossy surfaces should be dulled. If substrate is showing prime with appropriate Valspar primer. Steel: Solvent clean all surfaces per SSPC-SP 1. SSPCSP 2, Hand Tool Cleaning is the MINIMUM pre required. SSPC-SP 6/NACE NO. 3, Commercial Blast Cleaning is PREFERRED. Galvanized: All new galvanized metal must be allowed to weather for a minimum of six months before coating. SSPC-SP 1 Solvent Cleaning is the MINIMUM prep require. SSPC-SP 16, Brush-off Blast Cleaning of Non-Ferrous Metals is PREFERRED. Concrete/Masonry: All new concrete surfaces must be allowed to weather a minimum of 30 days prior to coating. Make sure all release agents are removed from surface prior to coating. SSPC-SP 13/NACE NO. 6, Surface Preparation of Concrete is required. Aluminum: SSPC-1 surface prep recommended. Drywall: Fill cracks, pits and voids with patching compound, let cure and sand smooth. Remove all sanding dust. Spot prime new or bare surfaces before applying the finish coat. Wood: Surface must be in sound condition and free from all dirt, oils and other contaminates. Solvent cleaner or other detergent might be required. Remove all loose wood by sanding as required.
  • Application
    Stir paint thoroughly. Intermix containers to ensure uniform color. Apply only when paint, surface and air temperatures are 50–90 °F (10–32 °C) during application and drying time. Brush: Use a premium-quality natural bristle brush. Roller: 3/8–3/4 inch nap, premium-quality synthetic cover. Airless spray: 2000 PSI, 0.011–0.015" tip. These recommendations are a starting point only. Due to variability in sprayers, we recommend testing your spray pattern and flow before proceeding.
  • Dry Time
    Dry Time @ 77 °F and 50 % Relative Humidity
    To The Touch: 1 hour - 2 hour
    Recoat: 4 hour
  • Clean-up & Disposal
    Easy soap and water cleanup.
Application Temperature
50 - 90 °F
Recommended Coats
1, 2 coats
Dry To the Touch*
1 hour - 2 hour
4 hour
*Dry Time @ 77 °F and 50 % Relative Humidity

Data Sheets

Download the product data sheet (PDS) and safety data sheet (SDS) for your Valspar door trim enamel latex plus.

Ratings & Reviews