Actual color may vary from on-screen representation.
Valspar® Professional Latex Dry Fall
This interior latex dry drop paint provides a high hiding, fast-drying flat white finish that increases light reflectance in large commercial buildings. Also available in flat black.
Paint Sheen Comparison
Available sheens for this product
Master Bedrooms · Formal Dining Rooms
Non-reflective finish ideal for low-traffic areas.
HOW TO USE
UsageProperly prepared interior, commercial-ceiling surfaces of plaster, masonry, wallboard, metal and wood.
PrepClean the surface thoroughly to remove surface contamination, mildew, stains and rust with an appropriate cleaner. Scrape off any loose or peeling paint. Spot prime when needed. Remove gloss from shiny surfaces with light sanding. Prime with an appropriate Valspar® primer. All bare wood must be primed with a Valspar® latex primer or undercoater. For a smoother final appearance on wallboard, prime with a Valspar® interior latex primer.
ApplicationUse a paint paddle or mixing blade to stir paint thoroughly, bringing pigments to the top of the can. To ensure uniform color, intermix all cans of the same color. Recommended application is with airless spray but product may be brushed or rolled as needed. Under normal conditions (77ºF and 50% Relative Humidity) overspray will dry to a harmless dust after a drop of 10 feet. Lower temperatures or higher humidity will require a longer drop distance. Coverage varies depending on the substrate and texture. Adjust fan width, atomization and gun distance from the surface to prevent curtaining while allowing maximum solvent release.
Dry TimeDry Time @ 77 °F and 50 % Relative HumidityTo The Touch: 30 minute - 1 hour Recoat: 1 hour
Clean-up & DisposalClean up with warm, soapy water.