Valspar® Interior/Exterior Latex Porch and Floor Enamel

Valspar Interior/Exterior Latex Porch and Floor Enamel is a satin-sheen coating that gives floors tough, long-lasting protection. The premium quality, 100% acrylic latex formula is ideal for indoor applications where fast dry is important. Can be lightly walked on as quickly as one hour, and takes regular foot traffic in 24 hours. Fast and easy water cleanup. This weather-resistant formula can be used indoors or outdoors, and gives years of long-lasting beauty and protection.

  • Use on wood, concrete, floors, primed metal, steps, railings and porches
  • Weather resistant
  • For interior and exterior use
  • Multi-purpose
  • Water clean-up
  • Wear resistant




1 Gallon


300 ft²/gal - 400 ft²/gal



  • Usage
    Properly prepared concrete, wood, primed metal, porches, basement floors, stairs, breezeways, indoor and outdoor floors. Not for use on exterior wood decks, garage floors or other automobile parking areas.
  • Prep
    The surface must be clean, dry and free of all loose or peeling paint. Thoroughly clean surface and remove wax and grease with an all-purpose cleaner (TSP or substitute). Remove gloss from previously painted surfaces by sanding.
  • Application
    Mix well before and during use. Intermix all containers to ensure uniform color. To increase traction on stairs and other areas where accidental slips may occur, add an anti-skid additive when applying the finishing coat. Use a premium quality roller, polyester brush, pad applicator or airless sprayer. DO NOT USE ANTI-SKID ADDITIVE IF SPRAYING. Apply liberally over the full length of the surface to avoid lap marks. If applied by airless sprayer, back-roll to ensure proper penetration. Finish with long, even strokes in one direction. Do not allow water to pond or puddle on newly painted surfaces. Clean tools and hands with warm, soapy water.
  • Dry Time
    Dry Time @ 77 °F and 50 % Relative Humidity
    To The Touch: 24 hour 24 hour
    Recoat: 24 hour
  • Clean-up & Disposal
    Clean tools and hands with warm, soapy water.
Application Temperature
50 - 90 °F
Recommended Coats
1, 2 coats
Dry To the Touch*
24 hour 24 hour
24 hour
*Dry Time @ 77 °F and 50 % Relative Humidity

Data Sheets

Download the product data sheet (PDS) and safety data sheet (SDS) for your Valspar interior-exterior latex porch floor enamel.

Product Number Base/Color Container Size SDS PDS
080047271045 Tint Base 1 Gallon SDS -
080047271069 Clear Base 1 Gallon SDS -
080047271120 Light Gray 1 Gallon SDS -
080047271144 Dark Gray 1 Gallon SDS -

Ratings & Reviews