HOW TO USE

• Usage
  Properly prepared exterior wall and trim including previously painted and primed brick, cement, cinder block, stucco and exterior wood and fiber cement siding and trim.
• Prep
  Thoroughly clean the surface and allow to dry. Remove all dirt, dust, chalk, rust, grease, wax and mildew. Patch all cracks with appropriate patching compound. Remove any powdery dust and efflorescence and prime with this product. Efflorescence is caused by water entry within the wall itself. If efflorescence is present, find the source of water entry (cracked parapet cap tiles, open joints or cracks, etc.) and repair before painting.
• Application
  Properly prepared exterior wall and trim including previously painted and primed brick, cement, cinder block, stucco and exterior wood and fiber cement siding and trim.
• Dry Time
  Dry Time @ 77 °F and 50 % Relative Humidity
  To The Touch: 1 hour - 4 hour
  Recoat: 4 hour
• Clean-up & Disposal
  Properly prepared exterior wall and trim including previously painted and primed brick, cement, cinder block, stucco and exterior wood and fiber cement siding and trim.