Actual color may vary from on-screen representation.
Valspar® Pro-Hide® Exterior Latex Primer
This exterior primer improves topcoat adhesion, durability and finish. The smooth, durable finish and mold-mildew- & algae resistant finish provide for a reliable base coat for your exterior paint. Best for use on wood, masonry, and stucco.
1 Gallon, 5 Gallon
HOW TO USE
UsageProperly prepared exterior bare or previously painted wood siding and trim, fiber cement board, vinyl, brick, cement,cinder block, stucco and non-rusted, galvanized gutters and downspouts.
PrepThoroughly clean the surface and allow to dry. Remove all dirt, dust, chalk, rust, grease, wax and mildew. Scrape off loose and peeling paint, sand smooth, then spot prime. Thoroughly remove chalk by vigorous washing, then rinse. Remove gloss from shiny surfaces. Countersink nails and apply an oil-based metal primer to exposed nail heads. Caulk cracks and joints.
ApplicationIf applying by sprayer, back-roll or back-brush to work primer into the surface. Apply a liberal coat of primer uniformly, workingwell into the surface. Allow to dry at least 2 hours before applying a latex topcoat, overnight for oil topcoats.
Dry TimeDry Time @ 77 °F and 50 % Relative HumidityTo The Touch: 1 hour - 2 hour Recoat: 2 hour
Clean-up & DisposalClean up with warm, soapy water. Do not pour unused contents down the drain. Consult with local authorities forproper method of disposal and recycling.