HOW TO USE

• Usage
  Properly prepared exterior wood and metal siding and trim, Hardboard, Fiber cement board, Vinyl, Primed metal, Shakes, Brick, Cement, Cinder block and Stucco. Do not use on glazed brick, floors or steps
• Prep
  Thoroughly clean the surface and allow to dry. Remove all dirt, dust, chalk, rust, grease, wax and mildew. Patch all cracks with appropriate patching compound. Remove any powdery dust and efflorescence. This product may be used to prime most new or bare surfaces.
• Application
  Paint only when paint, surface and air temperatures are 45–90ºF (10–32 ºC) during application and drying time. Do not apply in direct, hot sun, when rain is imminent, or late in the day when dew may affect the paint drying. Stir paint thoroughly. Intermix containers to ensure uniform color. Apply with a premium-quality roller, premium-quality synthetic brush or airless sprayer. Start at the highest point of the house and work across. Always paint back into freshly painted areas and end up at a door, window or outer edge. Move windows after 1 hour to prevent sticking.
• Dry Time
  Dry Time @ 77 °F and 50 % Relative Humidity
  To The Touch: 1 hour - 4 hour
  Recoat: 4 hour
• Clean-up & Disposal
  Clean up with warm, soapy water.