Valspar Storm Coat® Exterior Paint

Valspar® Storm Coat® is a 100% acrylic, professional-quality, exterior latex paint developed to provide outstanding durability, fade resistance and mildew resistance. It can be applied at temperatures as low as 35 °F, allowing you to extend the painting season. Storm Coat provides a smooth, uniform finish with spray, brush or roller application and can be applied to a variety of exterior surfaces: wood and metal siding, trim including hardboard, fiber cement board, vinyl, shakes, primed metal, brick, cement and cured cinder block and stucco.

  • 100% Acrylic resin provides maximum durability and color retention
  • Applies at temperatures as low as 35 °F
  • Excellent hide & coverage
  • Film provides mildew resistance
  • Great touch-up and flow & leveling provide a smooth, uniform finish
Sheens Flat, Satin, Semi Gloss Paint Sheen Guide
Sizes 1 Gallon, 5 Gallon
Coverage 350 ft²/gal - 450 ft²/gal
Paint Calculator
Available at Lowe's

How to use

Usage Best for walls and siding, this product applies easily to properly prepared and primed wood, drywall and vinyl or aluminum siding, as well as properly cured stucco, concrete or cement composition siding/panels
Prep Thoroughly clean the surface and allow to dry. Remove all wax, grease, dirt, chalk, mildew, loose and peeling paint, and other foreign matter. Remove gloss from shiny surfaces. Fill all cracks and joints with Acrylic caulk before top coating. Remove any powdery dust and efflorescence. New or bare surfaces should be primed with an appropriate Valspar® primer.
Application Stir paint thoroughly. Intermix containers to ensure uniform color. Apply with a premium-quality roller, polyester brush or airless sprayer. Paint the ceiling first, then the walls. If applying by roller, roll from dry area into wet area using firm, crisscross strokes. Finish with long, even strokes in one direction. Note: Some deep or bright colors may require an additional coat to obtain complete hide. Surface conditions and application technique can also impact coverage.
Dry Time Dry Time @ 77 °F and 50 % Relative Humidity To The Touch: 1 hour – 2 hour Recoat: 4 hour - 24 hour
Clean-up & Disposal Clean up with warm, soapy water
Application Temperature 35 °F - 90 °F
Dry to the Touch* 1 hour – 2 hour
*Dry Time @ 77 °F and 50 % Relative Humidity

Specifications

Download the product data sheet (PDS) and safety data sheet (SDS) for your product Valspar Storm Coat® Exterior Paint.
Product Number Sheen Base Container Size SDS PDS
042397594762 Semi-Gloss Neutral Base 1 Gallon SDS SDS SDS PDS
042397594731 Semi-Gloss White Base 1 Gallon SDS SDS SDS PDS
042397594625 Flat Pastel Base 5 Gallon SDS SDS SDS PDS
042397594571 Flat White Base 1 Gallon SDS SDS SDS PDS
042397594656 Satin White Base 1 Gallon SDS SDS SDS PDS
042397594588 Flat Pastel Base 1 Gallon SDS SDS SDS PDS
042397594748 Semi-Gloss Pastel Base 1 Gallon SDS SDS SDS PDS
042397594724 Satin Neutral Base 5 Gallon SDS SDS SDS PDS
042397594601 Flat Neutral Base 1 Gallon SDS SDS SDS PDS
042397594809 Semi-Gloss Neutral Base 5 Gallon SDS SDS SDS PDS