Valspar® One-Coat Transparent Stain & Sealer

Valspar Transparent Stain & Sealer provides just a hint of color. It protects new or bare wood while enhancing its natural beauty.

  • All-weather defense in one coat
  • Rain-ready in four hours
  • UV defense against fading
  • Provides a mold- and mildew-resistant finish

Opacity

Transparent


Sizes

1 Quart, 1 Gallon, 5 Gallon


Coverage

150 ft²/gal - 400 ft²/gal


AVAILABLE AT LOWE'S
Free store pick up

POPULAR STAIN COLORS

Highlight the natural beauty of wood with penetrating protection. Valspar Transparent Stain & Sealer is available in 4 colors.

Redwood Natural Tone
Canyon Brown
honey gold image
Honey Gold
Cedar Natural Tone

HOW TO USE

  • Usage
    New or reconditioned wood decks, porches, outdoor furniture, steps, railings, fences and siding.
  • Prep
    Be sure surface is free of all dirt, mildew stains, loose wood fibers and other foreign matter. In order to be effective, a stain must be able to penetrate. Surfaces must be sound and may be dry or damp. If damp, the wood should be free of puddles and not feel wet. Prepare previously stained or weathered surfaces with Valspar® Wood Cleaner or Valspar® All-In-One Wood Prep. On untreated weathered surfaces, it is best to pressure wash, but at minimum, scrubbing with a stiff bristle brush and rinsing with a garden hose should be done to completely remove all loose wood fibers. Sanding is best to remove any loose wood fibers.
  • Application
    Apply with nylon or polyester brushes, stain pads or professional spray equipment. When spraying, always back-brush immediately. To ensure desired appearance and proper drying time, always finish a small test area before proceeding. Do not overapply. Shake and stir thoroughly before and during use. If project requires more than 1 container, blend all containers together to ensure uniformity. Apply to small sections at a time (1–3 boards); start at one edge of the board and work end-to-end, following through to the end of the boards to avoid lap marks. A one-coat application is recommended.
  • Dry Time
    Dry Time @ 77 °F and 50 % Relative Humidity
    To The Touch: 2 hour - 4 hour
    Recoat: 2 hour - 4 hour
  • Clean-up & Disposal
    Clean up with soap and water. Do not freeze. Keep container closed when not in use. Do not transfer to other containers for storage or disposal. In case of spillage, absorb with inert material. Dispose in accordance with local, state and federal regulations.
  • Application Temperature

    50 °F - 90 °F

  • Recommended Coats

    1 coats

  • Dry to the Touch*

    2 hour - 4 hour

  • Recoat*

    2 hour - 4 hour

*Dry Time @ 77 °F and 50 % Relative Humidity

Data Sheets

Download the product data sheet (PDS) and safety data sheet (SDS) for your Valspar one-coat transparent stain sealer.

Product Number Base Container Size SDS PDS
035777884980 Honey Gold 1 Quart SDS PDS
035777885024 Honey Gold 1 Gallon SDS PDS
035777885161 Cedar Tone Natural 1 Quart SDS PDS
035777885031 Cedar Tone Natural 1 Gallon SDS PDS
035777885253 Cedar Tone Natural 5 Gallon SDS PDS
035777885185 Canyon Brown 1 Quart SDS PDS
035777885062 Canyon Brown 1 Gallon SDS PDS
035777885277 Canyon Brown 5 Gallon SDS PDS
035777885178 Red Naturaltone 1 Quart SDS PDS
035777885048 Red Naturaltone 1 Gallon SDS PDS
035777885260 Red Naturaltone 5 Gallon SDS PDS

Ratings & Reviews