HOW TO USE

• Usage
  Properly prepared interior walls and ceilings including previously painted and primed plaster, wood, brick, drywall, cement and metal.
• Prep
  Thoroughly clean the surface and allow to dry. Remove all wax, grease, dirt, chalk, mildew, loose and peeling paint and other foreign matter. Remove gloss from shiny surfaces. Repair all cracks and nail holes with patching compound. Painting over wallpaper is not recommended. New or bare surfaces should be primed with an appropriate Valspar® primer.
• Application
  Stir paint thoroughly. Intermix containers to ensure uniform color. Apply with a premiumquality roller, premium-quality synthetic brush or airless sprayer. Paint the ceiling first, then the walls. If applying by roller, roll from dry area into wet area using firm, crisscross strokes. Finish with long, even strokes in one direction. Note: Some deep or bright colors may require an additional coat to obtain complete hide. Surface conditions and application technique can also impact coverage.
• Dry Time
  Dry Time @ 77 °F and 50 % Relative Humidity
  To The Touch: 1 hour - 4 hour
  Recoat: 4 hour
• Clean-up & Disposal
  Clean up with warm, soapy water.