Actual color may vary from on-screen representation.
Valspar® Color Sample
Valspar interior paint sample allows you to try your color before painting the entire room. Perfect for finding the right match to your home's setting.
Paint Sheen Comparison
Available sheens for this product
Kitchens · Bathrooms · Kid’s Spaces
Soft lustre that can be scrubbed clean; ideal for high-traffic areas and moisture-prone rooms.
HOW TO USE
UsageThis paint is ideal for use on walls, ceilings and trim. It applies easily to properly prepared and primed plaster, wallboard, wood, brick, masonry and metal.
PrepThoroughly clean the surface and allow to dry. Remove wallpaper and loose, peeling paint. Remove gloss from shiny surfaces. Patch cracks and spot prime. Valspar® Color Sample paint can be used to prime patched areas and bare surfaces before applying the finish coat. For best results on heavily stained areas, drastic color changes or deep, vivid colors, prime with Valspar® Interior Multi-Purpose Primer/Sealer for optimal color accuracy and coverage.
ApplicationStir paint thoroughly. Intermix containers to ensure uniform color. Apply with a premium-quality roller, polyester brush or airless sprayer. Paint the ceiling first, then the walls. If applying by roller, roll from dry area into wet area using firm, crisscross strokes. Finish with long, even strokes in one direction. Note: Some deep or bright colors may require an additional coat to obtain complete hide. Surface conditions and application technique can also impact coverage.
Dry TimeDry Time @ 77 °F and 50 % Relative HumidityTo The Touch: 30 minute - 60 minute Recoat: 2 hour
Clean-up & DisposalClean up with warm, soapy water.