Actual color may vary from on-screen representation.
Valspar Reserve® Interior Paint + Primer
Valspar® Reserve® Paint + Primer is our most advanced protection with one-coat coverage for ultra-rich, fade-resistant color in a 100% acrylic formula. Enjoy a luxurious finish that provides remarkable hide and coverage, backed by a lifetime limited warranty. This Valspar product is made with our premium stain-blocking formula and has outstanding resistance against scratches, scuffs and scrubs to ensure your hard work lasts. Ideal for properly prepared interior walls, trim and ceilings or previously painted or bare drywall, plaster, masonry, wood and primed metal.
Paint Sheen Comparison
Available sheens for this product
Eggshell, Flat, Satin, Semi-Gloss
1 Quart, 1 Gallon, 5 Gallon
HOW TO USE
UsageProperly prepared interior walls, trim and ceilings of previously painted or bare drywall, plaster, masonry, wood and primed metal.
PrepThoroughly clean the surface and allow to dry. Remove wallpaper and loose, peeling paint. Scrape and sand peeled or damaged paint. Sand glossy surfaces dull. Drywall: Fill cracks and holes with patching paste and sand smooth. Plaster, Masonry, Block: New surfaces must cure at least 30 days. Fill rough surfaces if desired. Wood: Sand to a fresh surface. Patch imperfections with wood filler. Priming: This paint can be used to prime patched areas and bare surfaces before applying the finish coat. For best results on heavily stained areas, use a coat of an appropriate stain-blocking primer. For drastic color changes or deep, vivid colors, prime with an appropriate tintable primer for optimal color accuracy and coverage.
ApplicationStir paint thoroughly. Intermix containers for uniformity. Apply product when surface, air and product temperatures are between 50-90°F. Apply with a premium-quality brush, a synthetic roller cover or airless spray (2000 PSI, .015"-.019" tip). Thinning not required. Paint the ceiling first, then walls and trim. For roller application, cover approximately a 2' x 2' area using an “N” pattern. Finish with light roller strokes in one direction. Certain deep or bright colors may require an additional coat for complete hide. Surface conditions and application technique may impact coverage.
Dry TimeDry Time @ 77 °F and 50 % Relative HumidityTo The Touch: 1 hour - 2 hour Recoat: 2 hour - 4 hour
Clean-up & DisposalClean up with warm, soapy water. Do not pour unused contents down the drain. Consult with local authorities for proper method of disposal and recycling.