Valspar The Perfect White® Interior

Paint walls, doors and trim with confidence - The Perfect White™ is the easy, grab-and-go choice. Our cleanest, purest white, it's the no-fail favorite to complement any other color in your room. As a paint + primer, it provides excellent coverage in fewer coats, and the high-quality finish is stain resistant and scrubbable.

  • Paint + primer
  • Our cleanest, purest white
  • Superior durability
  • Quality finish
  • Excellent hide in fewer coats
  • Stain resistant and scrubbable
  • Gives mildew-resistant finish
  • 100% acrylic latex
  • Lifetime warranty

Sheens

Satin, Semi-Gloss


Sizes

1 Gallon


Coverage

300 ft²/gal - 400 ft²/gal


AVAILABLE AT LOWE'S

HOW TO USE

  • Usage
    Properly prepared interior walls and ceilings including previously painted and primed plaster, wood, brick, drywall, cement and metal.
  • Prep
    Thoroughly clean the surface and allow to dry. Remove wallpaper and loose, peeling paint. Remove gloss from shiny surfaces. Patch cracks and spot prime. Valspar Perfect White paint can be used to prime patched areas and bare surfaces before applying the finish coat. For best results on heavily strained areas, use a coat of Valspar® Interior Multi Purpose Primer-Sealer for optimal color accuracy and coverage. Drywall and Plaster: Fill cracks, pits and voids with patching compound. Allow new plaster to fully cure and sand smooth. Remove all sanding dust. Prime new and bare surfaces with Valspar Perfect White paint. Wood: Sand wood smooth and patch holes and imperfections with wood filler or putty and sand smooth. Remove all sanding dust. Prime new and bare surfaces with Valspar Perfect White paint. Metal: Prime bare metal surfaces with Valspar® Anti-Rust Primer.
  • Application
    Stir paint thoroughly. Intermix containers to ensure uniform color. Apply with a premium quality roller, polyester brush or airless sprayer. Paint the ceiling first, then the walls. If applying by roller, roll from dry area into wet area using firm, crisscross strokes. Finish with long, even strokes in one direction. Note: Some deep or bright colors may require an additional coat to obtain complete hide. Surface conditions and application technique can also impact coverage.
  • Dry Time
    Dry Time @ 77 °F and 50 % Relative Humidity
    To The Touch: 30 minute - 60 minute
    Recoat: 2 hour - 4 hour
  • Clean-up & Disposal
    Clean up with warm, soapy water.
  • Application Temperature

    50 °F - 90 °F

  • Recommended Coats

    2 coats

  • Dry to the Touch*

    30 minute - 60 minute

  • Recoat*

    2 hour - 4 hour

*Dry Time @ 77 °F and 50 % Relative Humidity

Data Sheets

Download the product data sheet (PDS) and safety data sheet (SDS) for your Valspar the perfect white interior.

Product Number Sheen Base Container Size SDS PDS
042397611445 Satin White 1 Gallon SDS -
042397611452 Semi-Gloss White 1 Gallon SDS -

Ratings & Reviews