Actual color may vary from on-screen representation.
Valspar® Concrete Bonding Primer
This concrete binding primer penetrates and bonds to etched concrete, enhancing the adhesion of the top coat finish. Ideal for use under Valspar Latex Porch & Floor Paint.
HOW TO USE
UsageInterior or exterior bare concrete
PrepEnsure your surface is clean, dry and free of all loose, peeling paint or contaminants. Areas where ponding water is evident should be leveled prior to application. Bare concrete: Allow 60 days minimum for new concrete to cure before painting. Clean, degrease and etch new or bare concrete with Valspar® Fast Prep®. Previously painted surfaces: Clean with an all-purpose cleaner (TSP or substitute), and remove gloss from shiny surfaces by sanding or using a chemical deglosser.
ApplicationMix well before and during use. Apply only when surface and air temperature are 50–90 °F (10–32 °C). Use a premium-quality, polyester brush for small area (stairs, etc.). For large areas, pour coating in a long, continuous bead across the “shorter side” of the surface. Spread the product uniformly with a premium-quality, 1/4" or 3/8" nap roller and finish with long, even strokes in one direction.
Dry TimeDry Time @ 77 °F and 50 % Relative HumidityTo The Touch: 1 hour - 4 hour Recoat: 1 hour
Clean-up & DisposalClean tools and hands with warm, soapy water.