HOW TO USE

• Usage
  For use on masonry, stucco, concrete, concrete block, plaster and previously painted surfaces.
• Prep
  Surface should be clean, dry and dull. Clean areas to remove all loose particles. Peeling paint, efflorescence, concrete dust and heavy chalk should be removed with a power washer and an appropriate cleaner. Rinse the surface thoroughly and allow it to dry. Scrape and sand smooth any remaining peeling surfaces. Make sure the surface is dull. Allow new surfaces to cure for at least 7 days. Surface may have a pH from 6 to 13.
• Application
  Stir thoroughly. Intermix containers to ensure uniform color. Apply with a premium-quality roller, premium quality synthetic brush or airless sprayer. If applying by spray, back-roll or backbrush to work paint into the surface. Apply a liberal coat of primer uniformly, working well into the surface. Surface conditions and application technique can also impact coverage.
• Dry Time
  Dry Time @ 77 °F and 50 % Relative Humidity
  To The Touch: 30 minute - 3 hour
  Recoat: 3 hour
• Clean-up & Disposal
  Clean up with warm, soapy water.