HOW TO USE

• Usage
  Properly prepared exterior bare or previously painted wood siding and trim, fiber cement board, vinyl, brick, cement,cinder block, stucco and non-rusted, galvanized gutters and downspouts.
• Prep
  Thoroughly clean the surface and allow to dry. Remove all dirt, dust, chalk, rust, grease, wax and mildew. Scrape off loose and peeling paint, sand smooth, then spot prime. Thoroughly remove chalk by vigorous washing, then rinse. Remove gloss from shiny surfaces. Countersink nails and apply an oil-based metal primer to exposed nail heads. Caulk cracks and joints.
• Application
  If applying by sprayer, back-roll or back-brush to work primer into the surface. Apply a liberal coat of primer uniformly, workingwell into the surface. Allow to dry at least 2 hours before applying a latex topcoat, overnight for oil topcoats.
• Dry Time
  Dry Time @ 77 °F and 50 % Relative Humidity
  To The Touch: 1 hour - 2 hour
  Recoat: 2 hour
• Clean-up & Disposal
  Clean up with warm, soapy water. Do not pour unused contents down the drain. Consult with local authorities forproper method of disposal and recycling.