HOW TO USE

• Usage
  Exterior wood decks, siding, fences, railings, steps and outdoor furniture.
• Prep
  Test in a small, inconspicuous area before applying to entire surface. Remove all deck furniture and decorative items Do not allow product to come into contact with metal and painted or finished surfaces, as it may cause spotting or discoloration. PROTECT SHRUBS: Wet down with water and cover with plastic. Hose off shrubs when job is done. Cover delicate vegetation to prevent damage. SHAKE WELL BEFORE USE. YOUR CLEAN WOOD WILL NEED PROTECTION FROM WATER DAMAGE AFTER CLEANING. Wait 2-3 days, depending on weather conditions, for the wood to dry thoroughly before applying an oil-based waterproofer or stain.
• Application
  Application: APPLY LIBERALLY to surface using a brush or pump sprayer. Do not apply to hot or wet surfaces. Let stand for 15 minutes. Do not allow to dry. RINSE using a garden hose with nozzle at maximum pressure or use a pressurewashing unit. Do not exceed 1000 PSI. After rinsing, neutralize with Valspar All-in-One Prep. IMPORTANT: All surfaces must be thoroughly neutralized with Valspar All-in-One Wood Prep, rinsed and dried a minimum of 2 days, depending on temperature and humidity prior to recoating. Any stripper not rinsed from the surface will cause coating adhesion problems. IMPORTANT: USE EXTREME CAUTION WHEN WORKING ON THE SURFACE TO BE STRIPPED. WOOD STRIPPER WILL CAUSE THE SURFACE TO BECOME VERY SLIPPERY. USE A FACE SHIELD OR GOGGLES WITH SIDE SHIELDS, RUBBER GLOVES AND PROTECTIVE FOOTWEAR FOR PROTECTION FROM HARMFUL CHEMICALS. REMOVE ANY CONTAMINATED CLOTHING IMMEDIATELY.
• Dry Time
  
  To The Touch: 2 day 2 day
• Clean-up & Disposal