Valspar® Pro-Hide® Interior PVA Primer

This primer effectively seals porous surfaces, preparing them for any architectural top coat. It can be used on properly prepared drywall & plaster. It is ideal for high-production spray application and dries to the touch in 1 hour. The fast-drying primer is specially formulated for the pro painter’s needs.

  • Good uniformity for any topcoat
  • Fast drying
  • Ideal for priming & sealing new bare drywall


1 Gallon, 5 Gallon


400 ft²/gal



  • Usage
    Properly prepared interior drywall, wood and masonry surfaces.
  • Prep
    Surface should be clean, dry and dull. Glossy surfaces should be dulled. Thoroughly clean the surface and remove all dirt,dust, chalk, rust, grease, wax, mildew and peeling paint and allow to dry. See technical data page for additional surface prep.
  • Application
    Stir primer thoroughly before and during use. Apply with a premium-quality polyester brush, pad applicator, roller or airless sprayer. If applying by sprayer, back-roll or back-brush to work primer into the surface. Apply a liberal coat of primer uniformly, working well into the surface. Allow to dry at least 4 hours before applying a latex topcoat, overnight for oil topcoats.
  • Dry Time
    Dry Time @ 77 °F and 50 % Relative Humidity
    To The Touch: 1 hour - 4 hour
    Recoat: 4 hour
  • Clean-up & Disposal
    Clean up with warm, soapy water. Do not pour unused contents down the drain. Consult with local authorities for propermethod of disposal and recycling.
Application Temperature
50 - 90 °F
Recommended Coats
1, 2 coats
Dry To the Touch*
1 hour - 4 hour
4 hour
*Dry Time @ 77 °F and 50 % Relative Humidity

Data Sheets

Download the product data sheet (PDS) and safety data sheet (SDS) for your Valspar pro-hide interior pva primer.

Product Number Sheen Base/Color Container Size SDS PDS
080047589270 - White 1 Gallon SDS PDS
080047589287 - White 5 Gallon SDS PDS

Ratings & Reviews