Valspar® Oil Porch, Floor & Patio Paint

Valspar® Porch, Floor and Patio Oil-based Paint glides on and dries to a hard, glossy finish for smooth, long-lasting protection

  • Glides on ultra smooth and dries to a hard, glossy finish
  • Polyurethane-fortified enamel resists weather, wear and scratches
  • Easy to use: brush, roller or spray application
  • Beautiful high-gloss finish stands up to the toughest indoor and outdoor conditions
  • Available in most Valspar colors
Sheens Gloss Paint Sheen Guide
Sizes 1 Gallon
Coverage 400 ft²/gal - 500 ft²/gal
Paint Calculator
Available at Lowe's and Independent Retailers
Options may vary by retailer. Contact your preferred retailer for availability.

How to use

Usage Ideal for use on properly prepared exterior wood, concrete, and primed metal such as porches, patios, breezeways, and concrete floors. Not for use on exterior wood decks, garage floors or other automobile parking areas.
Prep The surface must be clean, dry and free of all loose or peeling paint. Thoroughly clean surface and remove wax and grease with an all-purpose cleaner (TSP or substitute). Clean joints and cracks to remove all foreign material. Patch voids with appropriate crack patching material. Areas where ponding water is evident should be leveled prior to application. Although not required, a coat of Valspar® Concrete Bonding Primer prior to application of Anti-Skid Porch and Floor Paint coats will increase the adhesion to these properly prepared surfaces.
Application Mix well before and during use. Intermix all cans of the same color. To increase traction, add an anti-skid additive when applying the finishing coat. Use a premium-quality roller, polyester brush, pad applicator or airless sprayer. DO NOT USE ANTISKID ADDITIVE IF APPLYING BY SPRAY. Apply liberally over the full length of the surface to avoid lap marks. If applied by airless sprayer, back-roll to ensure proper penetration. Finish with long, even strokes in one direction.
Dry Time Dry Time @ 77 °F and 50 % Relative Humidity To The Touch: 24 hour – 72 hour Recoat: 24 hour - 24 hour
Clean-up & Disposal Clean tools with mineral spirits.
Application Temperature 50 °F - 90 °F
Dry to the Touch* 24 hour – 72 hour
*Dry Time @ 77 °F and 50 % Relative Humidity


Download the product data sheet (PDS) and safety data sheet (SDS) for your product Valspar® Oil Porch, Floor & Patio Paint.
Product Number Sheen Base Container Size SDS PDS
042397122361 Gloss Light Gray 1 Gallon SDS SDS SDS PDS
042397571572 Gloss Base 4 1 Gallon SDS SDS SDS PDS
042397122378 Gloss Dark Gray 1 Gallon SDS SDS SDS PDS
042397571565 Gloss Base 2 1 Gallon SDS SDS SDS PDS

Ratings & Reviews