Actual color may vary from on-screen representation.
LOVE YOUR COLOR GUARANTEE
At Valspar, we believe the right color is powerful. So if the first one isn't perfect, we'll replace it.

HOW TO USE
-
UsageProperly prepared interior wall, trim and ceiling surfaces including previously painted and primed drywall, plaster, acoustical tile, masonry, wood or metal.
-
PrepThoroughly clean the surface and allow to dry. Remove all wax, grease, dirt, chalk, mildew, loose and peeling paint and other foreign matter. Remove gloss from shiny surfaces. Repair all cracks and nail holes with patching compound. Painting over wallpaper is not recommended. New or bare surfaces should be primed with an appropriate Valspar® primer.
-
ApplicationStir paint thoroughly. Intermix containers to ensure uniform color. Apply with a premiumquality roller, polyester brush or airless sprayer. Paint the ceiling first, then the walls. If applying by roller, roll from dry area into wet area using firm, crisscross strokes. Finish with long, even strokes in one direction. Note: Some deep or bright colors may require an additional coat to obtain complete hide. Surface conditions and application technique can also impact coverage.
-
Dry TimeDry Time @ 77 °F and 50 % Relative HumidityTo The Touch: 1 hour - 4 hour Recoat: 4 hour
-
Clean-up & DisposalClean up with warm, soapy water.