Valspar Color Style®

Color Style® Premium Interior Latex paint beautifies your walls as it delivers a tough, durable finish that stands up to repeated scrubbing. Easy to clean and resistant to fading and staining, this fast-drying paint delivers a smooth, even finish and is ideal for high-use areas like kitchens, bathrooms and kids’ room.

  • Lasting durability
  • Washable
  • Stain resistant
  • Soap and water cleanup
  • Ideal for kitchens, bedrooms & bathrooms
Sheens Flat, Satin, Semi Gloss Paint Sheen Guide
Sizes 1 Quart, 1 Gallon
Coverage 300 ft²/gal - 400 ft²/gal
Paint Calculator
Available at Independent Retailers

Love Your Color Guarantee

At Valspar, we believe the right color is powerful. So if the first one isn’t perfect, we’ll replace it.

Learn More

Valspar Love Your Color Guarantee

How to use

Usage Properly prepared interior walls and ceilings including previously painted and primed plaster, wood, brick drywall, cement and metal.
Prep Before you paint clean and dry the surface thoroughly, removing all dirt, dust, rust and grease.On bare wood, coat knots and sappy areas with stain block primer/sealer. Then prime entire surface with exterior oil or latex primer.On previously painted surfaces, scrape, sand, then prime. Wire brush badly chalking areas. Dull glossy surfaces with gloss remover or sandpaper. Countersink nails and fill with putty. Caulk all cracks and joints.On unprimed, pre-primed or previously painted hardboard siding, prime with an exterior oil primer.On masonry, wire brush loose materials from chalky areas.On metal, remove rust on galvanized gutters and prime with a rust inhibitive primer.On new galvanized surfaces, allow to age 6 months before painting or clean with muriatic acid.On unpainted metal surfaces, remove rust, clean with mineral spirits and prime with a rust inhibitive primer.On vinyl siding, wash weathered vinyl siding thoroughly and allow to dry. Then paint with a color lighter than the original siding color.WARNING! Painting vinyl siding with darker colors will cause warping or deformation from heat absorption.CLEAN MILDEW FROM THE SURFACE! Mildew is a fungus that looks like dirt, but won't wash off. Mildew must be removed before painting or it will grow through any new coating. To remove mildew, scrub with a commercial mildew remover or a solution of 1 part liquid chlorine bleach to 3 parts water. Rinse thoroughly and allow to dry. Protect eyes and skin be wearing protective equipment, including rubber gloves and eye goggles when working with the bleach solution.
Application Stir paint thoroughly. Intermix containers to ensure uniform color. Apply with a premiumquality roller, polyester brush or airless sprayer. Paint the ceiling first, then the walls. If applying by roller, roll from dry area into wet area using firm, crisscross strokes. Finish with long, even strokes in one direction. Note: Some deep or bright colors may require an additional coat to obtain complete hide. Surface conditions and application technique can also impact coverage.
Dry Time Dry Time @ 77 °F and 50 % Relative Humidity To The Touch: 30 minute – 60 minute Recoat: 4 hour
Clean-up & Disposal Soap and water cleanup
Application Temperature 50 °F - 90 °F
Dry to the Touch* 30 minute – 60 minute
*Dry Time @ 77 °F and 50 % Relative Humidity

Specifications

Download the product data sheet (PDS) and safety data sheet (SDS) for your product Valspar Color Style®.
Product NumberSheenBaseContainer SizeSDSPDS
080047447976SatinWhite Base1 Gallon SDS SDS SDS PDS
080047440885FlatTint Base1 Gallon SDS SDS SDS PDS
080047447952SatinTint Base1 Quart SDS SDS SDS PDS
080047447969SatinClear Base1 Quart SDS SDS SDS PDS
080047440946FlatClear Base1 Gallon SDS SDS SDS PDS
080047440700Semi-GlossWhite Base1 Quart SDS SDS SDS PDS
080047440786Semi-GlossClear Base1 Gallon SDS SDS SDS PDS
080047440724Semi-GlossPastel Base1 Gallon SDS SDS SDS PDS
080047440731Semi-GlossPastel Base1 Quart SDS SDS SDS PDS
080047440755Semi-GlossTint Base1 Quart SDS SDS SDS PDS

Ratings & Reviews